IPROPEX JKE PTSS 2017

IPROPEX POLITEKNIK TUANTU SYED SIRAJUDDIN JABATAN KEJURUTERAAN ELEKTRIK (JKE)  2017


1. SOLAR BICYCLE

. 

Introduction

• Solar Bicycle also know as solar e-solar e-bike is an electric bicycle with and electric motor which is driven by the use of power from then battery which is being charged using solar energy by solar  panels
• Photovoltaic (PV) cells contained is solar panels convert the sun’s energy directly into electric energy are used
• It also also user a dynamoto turn on the headlinghts
• They can can traval up to 15 to 20 miles per hour (24 to 32 km/h)

Objective

• To develop a vechicle use renewable energy, environmentally friendly and cheap
• To develop an electrical bicycle that can charge the battery when it is not user
• To develop low speed bicycle, but for a longer distance 

2. SYSTEM WITH SECURITY

Introduction

• Now day,   mostly and article, newspaper or media social show about incidents “parents found their babies dead after being left inside car that overhead.
• This tragedies happen cause of the careless parents who leaving their child in parked car without opening windows and turned the engine om, because of that the babies could not breath as well as the car don’t have any oxygen inside till he died, espencially in hot weather.

Objective

• To build the system that can detect high temperature in a car
• Apply a renewable energy into a system via solar
• To be sure the child in the car safe

3. SMART DUSBIN

Introduction

• This project is to facilitate the  isolation for the successful recycling campaign
• SMART DUSBIN is an innovation of ordinary trash to other bins where by it can separate trash as mental and non-mental (plastic)
• To separate the rubbish so it will not be mixed

Objective

• To build device that can detect the type of metal and non-metal (plastic)
• Easier to separate the type of metal and non metal rubbish for recycling.

Problem statement

• Cannot detect and separate the type of metal and plastic rubbish

4. SMART HEATING

Introduction

• Energy saving technology thorough “Smart Heating” is a for professional electrical saving which is without the use of electrical current and easy to carry anywhere for heating. This product can also allow user to heat up food in case of blackouts. This project use a bulb as heat source for heating
• Uses object detecting sensor , temperature detecting sensor and bulb

Objective

• Produce micro-regulation system for heating using a bulb and sensor
• Save electricity by using the battery as a power source for turn on the hardware’s that have in the machine
• The upgrading of existing product on the market outside the exchange of electrical power to the battery

Problem statement

• Use the high power electricity is 240V
• Difficult to carry because use the plug and the body is metal

5. SMART AQUAPONIC

Introduction

• “Smart AQUAPONIC”  is the incredible combination of aquaculture (raising fish) plus hydroponic (growing plant in the water ). Hydroponics is the art of raising plants in the water, something using a grow media like expanded clay pebbles for the roots to graps. By providing (usually) commercial fertilizers to the water reservoir, plant growth can, in the right environment ,exceeed growing expectation.

Objective

• Can save a space for farming
• It can reduce wastage of water from aquarium to plant.

Problem statement

• Limited agricultural area
• Waste water of excessive water consumption

6. PORTABLE WIND TURBINE GENERATOR

Introduction

• Disruption of electricity can occur at any time day or night no matter if it happened in long or a short time to overcome the problem we invented a project that is wind-turbine concept to convert wind energy to electrical energy, so we can store in a battery and use it letter when we need

Objective

• Auto generate 12V supply to emergency lamp with 3-pin socket
• Generate electricity using wind energy

7. AUTO HAND WASH 

Introduction

• Is the automatic hand wash using the PIC18F4550 microcontroller and it is combination of water soap and layer

Objective

• To provide facility for automatic hand washing
• To reduce tissue paper by customer

8. AUTOMATIC WATERING 

Introduction

• This project use microcontroller to control the system.than use water level sensor, relay and buzzer connect to microcontroller.

Objective

• To produce  a system of watering supplies plants automatically
• To produce a watering system that less time
• To produce watering system that use pipe water and rain water

9. AUTOMATIC TRASH

Introduction

• Can separate the cans plastic. Usually where at market most of the trash that operates manually either by hand or foot to open the lid of the trash.

Objective

• Facilitate the isolation ofplastics and cans
• Accelerate the proses of taking plastics and cans
• A void for residual waste recycle throw in wrong dusbin

10. PLASTIC BOTTLE RECYCLE MACHINE

Introduction

• Is machine that used to cut the plastic bottle and turn into rope
• The machine that we build can transform the plastic bottle into other thing such as handcraft fence, and etc

Objective

• to develop a plastic bottle recycle machine
• the bottle that have been cut into strip can be use as rope, cloth hanger, handcraft, and etc assemble in proper casing to avoid injuries

11. AUTO WATER FILTRATION SYSTEM

Introduction

• Is auto system for aquarium and plant. Targeting to reduce human energy in crop husbandry and fish livestock. In the system we are having an aquarium which contains water and fishes

Objective

• Time being wasted when cleaning the aquarium and watering the plants
• The water out from aquarium being wasted when the cleaning process

12. PORTABLE ETCHING MACHINE

Introduction

• Portable etching machine the purpose of this project is to make an etching machine that is portable and save time
• This etching machine used 12V DC motor to operation

Objective

• Design and develop at the low cost etching machine
• Design and develop a portable etching machine for easier to etching PCB board

13. AUTOMATIC LATTICE WINDOW

Introduction

• To the lattice is made from iron and rush easily

Objective

• With the automatic control system, the lattice can be adjust with less force
• Be upgrate iron to aluminium which is long lasting and not easily rust

14. SMART TECHNOLOGY FERTIGATION PLANTING

Introduction

• Fertigation from the word ‘fertilizer’ and ‘irrigation’ which is a method a complete planting where the fertilizer a gave to the plan using solution. Through this technology water supply and nutrient given A balance based on the growth. The plant will grow healthy and able to give optimum result including light quality result

Objective

• Rice husk and coconut husk can be recycle as asoil
• Farming cause waste solved of energy, cost for long term

15. SMART FAN TEMPERATURE CONTROLLER

Introduction

• Use to control the speed of fan using microcontroller based on variation in temperature
• Temperature controlled fan is an alternative way to dealwith the speed of fan

Objective

• To design and construct a fan system that used temperature sensor which controlled by microcontroller
• To assist people who are disabled and are unable to control the speed of fan

16. SMART AMPAIAN

INTRODUCTION

• This project is to easier for human to drying clothes

Objective

• save time to drying clothes

17. MINI SOLAR TRAFFICS LIGHT

OBJECTIVE

• This project give provide facilities to people

18. DUAL SOURCE GENERATOR SYSTEM

Introduction

• This project is used sensor